产品名称：IGF1 ELISA Kit(Insulin-LikeGrowthFactor1)

Freshly dilute all reagents and bring all reagents to room temperature before use. If crystals have formed in the concentrate, mix gently until the crystals have completely dissolved. MIx Diluent Concentrate (10x): Dilute the MIx Diluent Concentrate 1:10 with reagent grade water. Store for up to 1 month at 2-8°C. IGF-1 Standard: Reconstitute the 10 ng of mouse IGF-1 Standard with 1 ml of MIx Diluent to generate a stock solution of 10 ng/ml. Allow the standard to sit for 10 minutes with gentle agitation prior to making dilutions. Prepare triplicate standard points by serially diluting the Standard solution (10 ng/ml) 1:2 with equal volume of MIx Diluent to produce 5, 2.5, 1.25, 0.63, 0.32 and 0.16 ng/ml. MIx Diluent serves as the zero standard (0 ng/ml). Any remaining solution should be frozen at -20°C. Standard Point Dilution [mIGF-1] (ng/ml) P1 1 part Standard (10 ng/ml) 10.00 P2 1 part P1 + 1 part MIx Diluent 5.00 P3 1 part P2 + 1 part MIx Diluent 2.50 P4 1 part P3 + 1 part MIx Diluent 1.25 P5 1 part P4 + 1 part MIx Diluent 0.63 P6 1 part P5 + 1 part MIx Diluent 0.32 P7 1 part P6 + 1 part MIx Diluent 0.16 P8 MIx Diluent 0.00 Biotinylated IGF-1 Antibody (100x): Spin down the antibody briefly and dilute the desired amount of the antibody 1:100 with MIx Diluent. Any remaining solution should be frozen at -20°C. Wash Buffer Concentrate (20x): Dilute the Wash Buffer Concentrate 1: 20 with reagent grade water. Streptavidin-Peroxidase Conjugate (100x): Spin down the SP Conjugate briefly and dilute the desired amount of the conjugate 1:100 with MIx Diluent. Any remaining solution should be frozen at -20°C.

Prepare all reagents, working standards and samples as instructed. Bring all reagents to room temperature before use. The assay is performed at room temperature (20 - 30 °C). Remove excess microplate strips from the plate frame and return them immediately to the foil pouch with desiccant inside. Reseal the pouch securely to minimize exposure to water vapor and store in a vacuum desiccator. Add 50 μL of Standard or sample per well, and cover wells and incubate for two hours. Start the timer after the last sample addition. Wash five times with 200 μL of Wash Buffer. Invert the plate and decant the contents, and blot it on absorbent paper towel to complete remove liquid at each step. Add 50 μL of Biotinylated IGF-1 Antibody to each well and incubate for two hours. Wash five times with 200 μL of Wash Buffer. Add 50 μL of Streptavidin-Peroxidase Conjugate per well and incubate for 30 minutes. Turn on the microplate reader and set up the program in advance. Wash five times with 200 μL of Wash Buffer. Add 50 μL of Chromogen Substrate per well and incubate for about 10 minutes or till the optimal blue color density develops. Gently tap plate to ensure thorough mixing and break the bubbles in the well with pipette tip. Add 50 μL of Stop Solution to each well. The color will change from blue to yellow. Read the absorbance on a microplate reader at a wavelength of 450 nm immediately.

Calculate the mean value of the triplicate readings for each standard and sample. To generate a Standard Curve, plot the graph using the standard concentrations on the x-axis and the corresponding mean 450 nm absorbance on the y-axis. The best-fit line can be determined by regression analysis using log-log or four-parameter logistic curve-fit. Determine the unknown sample concentration from the Standard Curve and multiply the value by the dilution factor. Standard Curve The curve is provided for illustration only. A standard curve should be generated each time the assay is performed.