产品详情
所在位置: 首页> 产品目录> 一抗>
  • 产品名称:HumanHemopexin/HPXELISAPairSet

  • 产品型号:
  • 产品厂商:SinoBiological
  • 产品文档:
你添加了1件商品 查看购物车
简单介绍:
HumanHemopexin/HPXELISAPairSet
详情介绍:
Purpose The Human Hemopexin / HPX ELISA Pair Set is for the quantitative determination of Human Hemopexin / HPX.
Detection Method Colorimetric
Sensitivity 18.8 pg/mL
Characteristics Capture Antibody: 1 mg/mL of mouse anti-Human Hemopexin / HPX monoclonal antibody (in PBS, pH 7.4). Dilute to a working concentration of 2 μg/mL in PBS before coating.

Detection Antibody: 0.4 mg/mL of rabbit anti-Human Hemopexin / HPX polyclonal antibody conjugated to horseradish-peroxidase (HRP) (in PBS, 50 % glycerol, pH 7.4). Dilute to working concentration of 0.5 μg/mL in detection antibody dilution buffer before use.

Standard: Each vial contains 48 ng of recombinant Human Hemopexin / HPX. Reconstitute with 1 mL detection antibody dilution buffer. After reconstitution, store at -20 °C to -80 °C in a manual defrost freezer. A seven-point standard curve using 2-fold serial dilutions in sample dilution buffer, and a high standard of 1200 pg/mL is recommended.

Sensitivity: The minimum detectable dose of Human Hemopexin / HPX was determined to be approximately 18.8 pg/mL. This is defined as at least three times standard deviations above the mean optical density of 10 replicates of the zero standard.
Components
  • Capture Ab
  • Detection Ab
  • Standard
Material not included CBS - 0.05 M
Na2CO3 - 0.05 M
NaHCO3, pH 9.6, 0.2 μm filtered
TBS - 25 mM
Tris, adjust pH to 7.4 by HCl
Wash Buffer - 0.05 % Tween20 in TBS, pH 7.2 - 7.4
Blocking Buffer - 5 % BSA in Wash Buffer
Sample dilution buffer - 0.5 % BSA in wash buffer, pH 7.2 - 7.4, 0.2 μm filtered
Detection antibody dilution buffer - 0.5 % BSA in wash buffer, pH 7.2 - 7.4, 0.2 μm filtered
Substrate Solution: To achieve best assay results, fresh substrate solution is recommended Substrate stock solution - 10 mg/mL TMB (Tetramethylbenzidine ) in DMSO Substrate dilution buffer - 0.05 M Na2HPO4 and 0.025 M citric acid , adjust pH to 5.5
Substrate working solution - For each plate dilute 250 μL substrate stock solution in 25 mL substrate dilutionbuffer and then add 80 μL 0.75 % H2O2 , mix it well
Stop Solution - 2 N H2SO4
Alternative Name HPX
Background Human Hemopexin ( HPX) is a serum glycoprotein responsible for the transport of haem to tissues such asliver, by receptor-mediated endocytosis, in an analogous manner to the iron transport protein transferrin, with recycling of intact haemopexin. Hemopexin binds heme with the highest affinity of any known protein. Its performs functions in scavenging the heme released or lost by the turnover of heme proteins suchas hemoglobin, protects the body from the oxidative damage that free heme can cause. In addition, hemopexin releases its bound ligand for internalisation upon interacting with a specific receptor situated onthe surface of liver cells, thus implicated in preservation of the body's iron. High hemopexin levels indicatethat there has been significant degradation of heme containing compounds and hemopexin is made toscavenge any heme it can, and high hemopexin levels are therefore one of the diagnostic features of ahemolytic anemia. Hemopexin is an acute-phase plasma glycoprotein, produced mainly by the liver and released into plasma, where it binds heme with high affinity. Other sites of hemopexin synthesis are the nervous system, skeletalmuscle, retina, and kidney. The only known receptor for the heme-hemopexin complex is the scavengerreceptor, LDL receptor-related protein (LRP) 1, which is expressed in most cell types, thus indicating multiplesites of heme-hemopexin complex recovery. Hemopexin is a heme-binding plasma glycoprotein which, afterhaptoglobin, forms the second line of defense against hemoglobin-mediated oxidative damage duringintravascular hemolysis. A decrease in plasma hemopexin concentration reflects a recent release of hemecompounds in the extracellular compartment. Heme-hemopexin complexes are delivered to hepatocytes byreceptor-mediated endocytosis after which hemopexin is recycled to the circulation. Altered serum or plasmaconcentrations of hemopexin are found not only in hemolytic anemias but also in other conditions such aschronic neuromuscular diseases and acute intermittent porphyria. The diagnostic utility of hemopexin is lessclear in other pathological conditions. Further studies are necessary to fully establish the clinical significanceof hemopexin determination.
Application Notes Optimal working dilution should be determined by the investigator.
Protocol This ELISA Pair Set is a solid phase sandwich ELISA (Enzyme-Linked Immunosorbent Assay). It utilizes a monoclonal antibody specific for Human Hemopexin / HPX coated on a 96-well plate. Standards and samples are added to the wells, and any Human Hemopexin / HPX present binds to the immobilized antibody. The wells are washed and a horseradish peroxidase conjugated rabbit anti-Human Hemopexin / HPX polyclonal antibody is then added, producing an antibody-antigen-antibody "sandwich". The wells are again washed and TMB substrate solution is loaded, which produces color in proportion to the amount of Human Hemopexin / HPX present in the sample. To end the enzyme reaction, the stop solution is added and absorbances of the microwell are read at 450 nm.
Reagent Preparation
  1. Dilute the capture antibody to the working concentration in CBS. Immediately coat a 96-well microplate with 100 μL per well of the diluted capture antibody. Seal the plate and incubate overnight at 4 °C.
    2. Aspirate each well and wash with at least 300 μL wash buffer, repeating the process two times for a total of three washes. Complete removal of liquid at each step is essential for good performance. After the last wash, remove any remaining wash buffer by inverting the plate and blotting it against clean paper towels.
    3. Block plates by adding 300 μL of blocking buffer to each well. Incubate at room temperature for a minimum of 1 hour.
    4. Repeat the aspiration/wash as in step 2. The plates are now ready for sample addition.
Assay Procedure
  1. Add 100 μL of sample or standards in sample dilution buffer per well. Seal the plate and incubate 2 hours at roomtemperature.
    2. Repeat the aspiration/wash as in step 2 of plate preparation.
    3. Add 100 μL of the detection antibody, diluted in antibody dilution buffer, to each well. Seal the plate and incubate 1hour at room temperature.
    4. Repeat the aspiration/wash as in step 2 of plate preparation.
    5. Add 200 μL of substrate solution to each well. Incubate for 20 minutes at room temperature (if substrate solutionis not as requested, the incubation time should be optimized). Avoid placing the plate in direct light.
    6. Add 50 μL of stop solution to each well. Gently tap the plate to ensure thorough mixing.
    7. Determine the optical density of each well immediately, using a microplate reader set to 450 nm.
Calculation of Results

Calculate the mean absorbance for each set of duplicate standards, controls and samples. Subtract the mean zero standard absorbance from each. Construct a standard curve by plotting the mean absorbance for each standard on the y-axis against the concentration on the x-axis and draw a best fit curve through the points on the graph. To determine the concentration of the unknowns, find the unknowns' mean absorbance value on the y-axis and draw a horizontal line to the standard curve. At the point of intersection, draw a vertical line to the x-axis and read the concentration. If samples have been diluted, the concentration read from the standard curve must be multiplied by the dilution factor. Alternatively, computer-based curve-fitting statistical software may also be employed to calculate the concentration of the sample.

Restrictions For Research Use only
Format Liquid
Handling Advice Avoid repeated freeze-thaw cycles.
Storage -20 °C,-80 °C
Storage Comment Capture Antibody: Aliquot and store at -20°C to -80°C for up to 6 months from date of receipt. Avoid repeated freeze-thaw cycles.

Detection Antibody: Protect it from prolonged exposure to light. Aliquot and store at -20°C to -80°C and for up to 6 months from date of receipt. Avoid repeated freeze-thaw cycles.

Standard: Store lyophilized standard at -20°C to -80°C for up to 6 months from date of receipt. Aliquot and store the reconstituted Standard at -80°C for up to 1 month. Avoid repeated freeze-thaw cycles.
Expiry Date 6 months
Supplier Images
 image for Human Hemopexin / HPX ELISA Pair Set (ABIN2010371) Human Hemopexin / HPX ELISA Pair Set