|
Format
|
Lyophilized
|
|
Reconstitution
|
Reconstitution Buffer: Restore with deionized water (or equivalent), Reconstitution Volume: 1.0 mL
|
|
Concentration
|
1.0 mg/mL
|
|
Buffer
|
0.02 M Potassium Phosphate, 0.15 M Sodium Chloride, pH 7.2, 10 mg/mL Bovine Serum Albumin (BSA) - Immunoglobulin and Protease free
|
|
Preservative
|
Sodium azide
|
|
Precaution of Use
|
WARNING: Reagents contain sodium azide. Sodium azide is very toxic if ingested or inhaled. Avoid contact with skin, eyes, or clothing. Wear eye or face protection when handling. If skin or eye contact occurs, wash with copious amounts of water. If ingested or inhaled, contact a physician immediately. Sodium azide yields toxic hydrazoic acid under acidic conditions. Dilute azide-containing compounds in running water before discarding to avoid accumulation of potentially explosive deposits in lead or copper plumbing.
|
|
Handling Advice
|
Product is photosensitive and should be protected from light.
Avoid cycles of freezing and thawing.
This vial contains a relatively low volume of reagent (25 µL). To minimize loss of volume dilute 1:10 by adding 225 µL of the buffer stated above directly to the vial. Recap, mix thoroughly and briefly centrifuge to collect the volume at the bottom of the vial. Use this intermediate dilution when calculating final dilutions as recommended below.
|
|
Storage
|
-20 °C
|
|
Storage Comment
|
Store the vial at -20 °C or below after dilution.
|
|
Expiry Date
|
12 months
|
